Riedon Blog

Welcome to the Riedon Blog.  Here you will find articles and resources related to all types of resistors and shunts. 

Typical resistors parameters and their meanings:

Resistor Paramaters • Impulse strength is the maximum allowed short-duration (impulse) electric energy that the resistor can withstand without exceeding the limiting temperature. • Limiting voltage, also referred to as dielectric strength, is the maximum allowable...

read more
Precision or Power?

Precision or Power?

Precision and Power Resistors Resistors are often designated as precision or power. Precision resistors are designed for applications where tight resistance tolerance and stability are primary considerations, and they generally have restricted operating temperature...

read more

Bleeder Resistor

Bleeder Resistor Bleeder Resistors are used as a safety feature to discharge capacitors to safe voltage levels after power is removed. A bleed resistor may be either connected permanently for cost effectiveness and high reliability or switched across a capacitor for...

read more

TO-263 Resistor (D-Pak)

  TO-263 Housing (D-Pak) Resistance from 0.01 Ohm to 51K Ohms Power Rating to 35 Watts Resistance Tolerances to ±1% TCR to ±50ppm/K Load Stability to 1% Solder Reflow Secure at 260°C / 20s Isolated Back Plate             LINK to date...

read more

Vishay Resistors cross to Riedon Resistors

 CCF-07  MF2207  CCF-55  MF2207  CMB0207  MFM65  CMF-55  MF2207  CMF-65  MF2617  CMF-70  MF2617  CNS 020 Series  MF2207, MF2617  CPCC-10  UV-10  CPCC-3  UV-3  CPCC-5  UV-5  CPCF-3  UV-3  CPCF-5  UV-5  CPCL-10  UV-10  CPCL-3  UV-3  CPCL-5  UV-5  CPCP-10  UV-10  CPCP-3...

read more