Riedon Blog

Welcome to the Riedon Blog.  Here you will find articles and resources related to all types of resistors and shunts. 

Typical resistors parameters and their meanings:

Resistor Paramaters • Impulse strength is the maximum allowed short-duration (impulse) electric energy that the resistor can withstand without exceeding the limiting temperature. • Limiting voltage, also referred to as dielectric strength, is the maximum allowable...

View Full Post

Bleeder Resistor

Bleeder Resistor Bleeder Resistors are used as a safety feature to discharge capacitors to safe voltage levels after power is removed. A bleed resistor may be either connected permanently for cost effectiveness and high reliability or switched across a capacitor for...

View Full Post

TO-263 Resistor (D-Pak)

  TO-263 Housing (D-Pak) Resistance from 0.01 Ohm to 51K Ohms Power Rating to 35 Watts Resistance Tolerances to ±1% TCR to ±50ppm/K Load Stability to 1% Solder Reflow Secure at 260°C / 20s Isolated Back Plate             LINK to date...

View Full Post

Vishay Resistors cross to Riedon Resistors

 CCF-07  MF2207  CCF-55  MF2207  CMB0207  MFM65  CMF-55  MF2207  CMF-65  MF2617  CMF-70  MF2617  CNS 020 Series  MF2207, MF2617  CPCC-10  UV-10  CPCC-3  UV-3  CPCC-5  UV-5  CPCF-3  UV-3  CPCF-5  UV-5  CPCL-10  UV-10  CPCL-3  UV-3  CPCL-5  UV-5  CPCP-10  UV-10  CPCP-3...

View Full Post