Riedon offers the best lead-time in the industry. Average lead-time is 4-5 weeks for wire wound resistors. 1-2 week premium delivery is also available!

Low Ohm Power Resistors

MT Series

Resistance from 0.003 to 0.10Ohms

Tolerance to ±0.1%

TCR to ±20 ppm/K _{(Four Terminal Version)}

For Current Sensing and Shunt Applications

All Welded Construction

Low Inductance (<10nH)

Four Terminal Versions Available _{(Consult Factory)}

Specification	Value
Tolerances	2 Terminal: ±1% / ±5% _{(Contact Factory for Others)} 4 Terminal: ±0.1% / ±0.5% / ±1% / ±5% _{(Contact Factory for Others)}
Temperature Coefficient	Refer to PDF
Inductance	<10nH
Dielectric Strength	1000VAC (500 VAC for MT-1A and MT-2A)
Insulation Resistance	>1000 MOhms / Dry
Environmental Performance _{(MIL-STD 202)}	∆R	Test Conditions
Load Life	±1%	70°C / 90 min ON / 30 min OFF / 1000 hr
Moisture Resistance		40°C / 90-95% RH / DC 0.1W / 1000 hr
Temperature Cycling		-40°C for 30 min/ +125°C for 30 min / 1000 hr
Short Term Overload		5X rated power for 5 seconds